St. Thomas' College of Engineering & TechnologyApproved by AICTE, New Delhi & Affiliated to MAKAUT, W.B

Dr. Soumen Maiti

Basic Science & Humanities (Foundation Courses) | BS & H
Associate Professor, Coordinator
[email protected]

Area of Specialization

 

Physics (Material Science & Nanotechnology)

Teaching Experience

10 Years

Research Experience

06 Years

Academic Qualifications

 

Ph.D. (Sc.): Jadavpur University, 2015

M.Sc.: Bengal Engineering & Science University (Presently: IIEST), Shibpur, 2009

B.Sc.: Calcutta University, 2007

Date of Joining 06-01-2014
Date of Assign as Prof / A.P 01-10-2021

 

PhD Guidance (Associate-Supervisor): 01 (Degree awarded), 01 (Registered)

Internation Journal Publications

  1. S. Das, P. Pal, A. Chatterjee, S. Maiti, T. Paul and K. K. Chattopadhyay, Charge Storage Mechanism via Vacancy-Mediated Anion Intercalation in a Two-Dimensional Cs2PbI2Cl2 Ruddlesden–Popper Perovskite, ACS Appl. Energy Mater., 8 (2025), 1349, Impact Factor: 5.5
  2. T. Paul, A. Sahoo, S. Maiti, S. Mandal, S. Bhattacharjee, A. Maitye and K. K. Chattopadhyay, Observation of piezoelectricity in a lead-free Cs2AgBiBr6 perovskite: a new entrant in the energy harvesting arena, Nanoscale, 16 (2024), 16127, Impact Factor: 5.8
  3. S. Poddar, S. Mondal, S. Bhattacharjee, P. Pal, S. Maiti, A. Banerjee, K. K. Chattopadhyay, Bi-functional Rb4Ag2BiBr9-PVDF composite based Piezoelectric mechanical energy harvester and light assisted self-charging power unit, Nano Energy, 123 (2024), 109380, ISSN: 2211-2855, Impact Factor: 16.8
  4. N. H. Makani, P. Kumar, T. Paul, A. Sahoo, S. Maiti, R. Banerjee, Low-dimensional halide perovskite/PVDF nanocomposite with enhanced piezoelectricity as flexible biomechanical energy harvester, Chemical Physics Impact, 8 (2024) 100564, Impact Factor: 3.8
  5. K. Chanda, P. Bairi, S. Maiti, A. Tripathi, R. Thapa, S. Ghosh, K. Panigrahi, D. Roy, R. Sarkar, K. Kumar Chattopadhyay, Crystallinity and interfacial Mo–N–C bond engineered MoS2 embedded graphitic nitrogen doped carbon hollow sphere for enhanced HER activity, International Journal of Hydrogen Energy, 56 (2024), 570, ISSN 0360-3199, Impact Factor: 8.3
  6. S. Mondal, S. Maiti, T. Paul, S. Poddar, B. K. Das, K. K. Chattopadhyay, CsPbI3–PVDF Composite-Based Multimode Hybrid Piezo-Triboelectric Nanogenerator: Self-Powered Moisture Monitoring System, ACS Appl. Mater. Interfaces, 16 (2024), 9231, ISSN: 1944-8252, Impact Factor: 8.3
  7. M. Ghosh, P. Pal, T. Paul, S. Maiti, S. Bhattacharjee, K. Sardar, A.Sahoo, A. Ghosh, K. K. Chattopadhyay,Charge-Carrier Dynamics and Relaxation in Perovskite for Energy Storage: Existence of Anharmonic Rattling-Assisted Polaron Dynamics, Physical Review Applied, 20 (2023) 054032,ISSN 2331-7019, Impact Factor: 3.8
  8. H. Makani, P. Kumar, T. Paul, A. Sahoo, S. Maiti, R. Banerjee, Low-dimensional halide perovskite/PVDF nanocomposite with enhanced piezoelectricity as flexible biomechanical energy harvester, Chem. Phys. Imp., 8 (2024), 100564 ISSN: 2667-0224, Impact Factor: 3.8
  9. A. Sahoo, T. Paul, A. Nath, S. Maiti, P. Kumar, P. Ghosh, R. Banerjee, Preferential perovskite surface-termination induced high piezoresponse in lead-free in situ fabricated Cs3Bi2Br9-PVDF nanocomposites promotes biomechanical energy harvesting, Nanoscale, 15 (2023), 11603-11615, ISSN No: 2040-3372, Impact Factor: 5.8
  10. T. Paul, A. Sahoo, S. Maiti, D. S. Gavali, R. Thapa, R. Banerjee, Halide Tunablility Leads to Enhanced Biomechanical Energy Harvesting in Lead-Free Cs2SnX6-PVDF Composites, ACS Appl. Mater. Interfaces, 15 (2023), 34726, ISSN: 1944-8252, Impact Factor: 8.3
  11. S. Mondal, S. Poddar, S. Bhattacharjee, S. Maiti, A. Banerjee, K. K. Chattopadhyay, Lead Free Halide Perovskite Embedded PVDF Based Efficient Mechanical Energy Harvester: Self-Driven Respiratory Sensor, Nano Energy, 115 (2023), 108689, ISSN: 2211-2855, Impact Factor: 16.8
  12. S. Mondal, S. Thakur, S. Maiti, S. Bhattacharjee, K. K. Chattopadhyay, Self-Charging Piezo-Supercapacitor: One-Step Mechanical Energy Conversion and Storage, ACS Appl. Mater. Interfaces, 15 (2023), 6, 8446–8461, ISSN: 1944-8252, Impact Factor: 8.3
  13. K. Sardar, T. Paul, S. Maiti, S. Thakur, A. Sahoo, G. Majumdar and K. K. Chattopadhyay, Two-dimensional layered CsPb2Br5 perovskite as high-performance electrode material for supercapacitor application, MRS Communications, 13 (2023), 1131–1138, ISSN: 2159-6867, Impact Factor: 1.8
  14. N. H. Makani, P. Kumar, T. Paul, S. Maiti, A. Sahoo, M. Singh, R. Banerjee, Cathodoluminescence properties of phase pure low-dimensional Cs4PbBr6 perovskite and its stability under high-energy electron beams, MRS Communications, 12 (2022), 1212, ISSN: 2159-6867, Impact Factor: 1.8
  15. A. Sahoo, T. Paul, N. H. Makani, S. Maiti, R. Banerjee, High Piezoresponse in Low-dimensional Inorganic Halide Perovskite for Mechanical Energy Harvesting, Sustainable Energy & Fuels, 6 (2022), 4484, ISSN: 2398-4902, Impact Factor: 5.0
  16. S. Mondal*, S. Maiti*, T. Paul*, A. Sahoo, S. Bhattacharjee, N. S. Das and K. K. Chattopadhyay, All-inorganic Halide Perovskite Tuned Robust Mechanical-Energy Harvester: Self driven Posture Monitor and Power Source for Portable Electronics, Applied Materials Today, 26 (2022), 101385 (* equal contribution), ISSN: 2352-9407, Impact Factor: 7.2
  17.  T. Paul, P. K. Sarkar, S. Maiti, A. Sahoo and K. K. Chattopadhyay, Solution-Processed Light Induced Multilevel Non-volatile Wearable Memory Device Based on CsPb2Br5 Perovskite, Dalton Trans., 51 (2022), 3864, ISSN 1477-9234, Impact Factor: 3.5
  18. A. Sahoo, T. Paul, S. Maiti and R. Banerjee, Temperature-dependent Dielectric Properties of CsPb2Br5: A 2D inorganic halide perovskite, Nanotechnology, 23 (2022), 195703, ISSN No: 1361-6528, Impact Factor: 2.9
  19. M. Maiti, M. Sarkar, S. Maiti, D. Liu, Gold decorated shape-tailored zinc oxide-rGO nanohybrids: Candidate for pathogenic microbe destruction and hazardous dye degradation, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 641 (2022), 128465, ISSN No: 0927-7757, Impact Factor: 4.9
  20. N. Debabhuti, S. Mukherjee, S. Neogi, P. Sharma, U. H. Sk, S. Maiti, M. P. Sarkar, B. Tudu, N. Bhattacharyya, R. Bandyopadhyay, A study of vegetable oil modified QCM sensor to detect β-pinene in Indian cardamom, Talanta, 236 (2022), 122837, ISSN: 0039-9140, Impact Factor: 5.6
  21. S. Thakur, T. Paul, S. Maiti, K. K. Chattopadhyay, All-inorganic CsPbBr3 perovskite as potential electrode material for symmetric supercapacitor, Solid State Sciences, 122 (2021), 106769, ISSN: 1293-2558, Impact Factor: 3.4
  22. T. Paul, S. Maiti, B. Chatterjee, P. Bairi, B. Das, S. Thakur, K. K. Chattopadhyay, Electrochemical Performance of 3D Network CsPbBr3 Perovskite Anode for Li-ion Batteries: Experimental Venture with Theoretical Expedition, J. Phys. Chem. C, 125 (2021), 16892–16902, ISSN: 1932-7455, Impact Factor: 3.3
  23. A. Panda, S. Maiti, K. Palodhi, R. Chakraborty, Role of interface layer in improving the efficiency of thin film silicon solar cell, Opt. Quantum Electron, 53 (2021) 496, ISSN: 1572-817X, Impact Factor: 3.3
  24. T. Paul, S. Maiti, U. Mukherjee, S. Mondal, A. Sahoo, K. K. Chattopadhyay, Cube shaped FAPbBr3 for piezoelectric energy harvesting devices, Materials Letters, 301 (2021) 130264, ISSN: 0167-577X, Impact Factor: 2.7
  25. K. Sardar, S. Thakur, S. Maiti, N. Besra, P. Bairi, K. Chanda, G. Majumdar and K. K. Chattopadhyay, Amalgamation of MnWO4 nanorods with amorphous carbon nanotubes for highly stabilized energy efficient supercapacitor electrode, Dalton Trans., 50 (2021) 5327-5341, ISSN 1477-9234, Impact Factor: 3.5
  26. A. Sikdar, A. Majumdar, A. Gogoi, P. Dutta, M. Borah, S. Maiti, C. Gogoi, K. A. Reddy    Y. Oh and U. N. Maiti, Diffusion driven nanostructuring of metal-organic frameworks (MOFs) for graphene hydrogel based tunable heterostructures: Highly active electrocatalyst for efficient water oxidation, J. Mater. Chem. A, 9 (2021) 7640-7649, ISSN No: 2050-748, Impact Factor: 10.7
  27. K. Chanda, S. Maiti, S. Sarkar, P. Bairi, S. Thakur, K. Sardar, N. Besra, N. S. Das and K. K. Chattopadhyay, Hierarchical Assembly of MnO2 Nanosheet on CuCo2O4 Nanoflake over Fabric Scaffold for Symmetric Supercapacitor, ACS Appl. Nano Mater., 4 (2021) 1420–1433, ISSN No: 2574-0970, Impact Factor: 5.3
  28. S. Thakur*, S. Maiti*, K. Sardar, N. Besra, P. Bairi, K. Panigrahi, K. Chanda, T. Paul, K. K. Chattopadhyay, New Class of Trimetallic Oxide Hierarchical Mesoporous Array on Woven Fabric: Electrode for high-Performance and Stable battery type Ultracapacitor, Journal of Energy Storage, 35 (2021) 102249 (* equal contribution), ISSN 2352-152, Impact Factor: 8.9
  29. Mondal, S. Das, S. Maiti, N. Besra, T. Paul and K. K. Chattopadhyay, Hybrid piezoelectric nanogenerator based on PVDF film and vertically aligned ZnO nanorods for energy harvesting applications, Int. J. of Nanotechnol., 18 (2021), 669-678, ISSN No: 1741-8151
  30. T. Paul, P. Sarkar, S. Maiti, K. K. Chattopadhyay, Multilevel programming and light-assisted resistive switching in halide tunable all-inorganic perovskite cube for flexible memory devices, ACS Appl. Elect. Mater., 2(2020), 3667–3677, ISSN No: 2637-6113, Impact Factor: 4.3
  31. N. Besra, K. Sardar, S. Maiti, P. K. Sarkar, T. Paul, S. Thakur, G. Majumdar and K. K. Chattopadhyay, Incorporation of V2O5 Nanorods as an Alternative Approach to Enhance the Device Performance of Perovskite Photodetector: A Step towards Stability against Ambient Water Species, Dalton Transactions, 49 (2020), 15788-15799, ISSN No: Impact Factor: 3.5
  32. K. Gogoi, S. Das, S. Maiti, A. Chowdhury, Semiconductor Grafted Polymer-Embedded Reduced Graphene Oxide Nanohybrid for Power-Efficient Non-volatile Resistive Memory Applications, ACS Applied Nano Materials, 3 (2020), 11562–11573. ISSN No: 2574-0970, Impact Factor: 5.3
  33. A. Panda, S. Maiti, R. Chakraborty, K. Palodhi, Effect of modified double-sided grating structures on efficiency enhancement of thin film silicon solar cells, Applied Optics, 59 (2020), 9532-9539, ISSN No: 2155-3165, Impact Factor: 1.7
  34. S. Mondal, T. Paul, S. Maiti, B. Das, K. K. Chattopadhyay, Human motion interactive mechanical energy harvester based on all inorganic perovskite-PVDF, Nano Energy, 74 (2020) 104870, ISSN: 2211-2855, Impact Factor: 16.8
  35. S. Das, T. Paul, S. Maiti, K. K. Chattopadhyay, Ambient Processed CsPbX3 Perovskite Cubes for Photocatalysis, Materials Letters, 267 (2020) 127501, ISSN: 0167-577X, Impact Factor: 2.7
  36. M. Maiti, M. Sarkar, S. Maiti, M. A. Malik, S. Xu, Modification of geopolymer with size controlled TiO2 nanoparticle for enhanced durability and catalytic dye degradation under UV light, Journal of Cleaner Production, 255 (2020) 120183, ISSN: 1879-1786. Impact Factor: 9.7
  37. T. Paul, S. Maiti, N. Besra, B. K. Chatterjee, B. Kumar Das, S. Thakur, S. Sarkar, N. Sankar Das and K. K. Chattopadhyay, Tailored CsPbX3Nanorods for Electron-Emission Nanodevices, ACS Applied Nano Materials, 2 (2019) 5942, ISSN No: 2574-0970, Impact Factor: 5.3
  38. T. Paul, D. Das, B. K. Das, S. Maiti, S. Sarkar and K. K. Chattopadhyay, CsPbBrCl2/g-C3N4 Type II Heterojunction as Efficient Visible Range, Journal of Hazardous Materials, 380 (2019) 120855, ISSN No: 0304-3894, Impact Factor: 12.2
  39. M. Maiti, M. Sarkar, S. Maiti, D. Liu, S. Xu, Efficacy of shape monitored reduced graphene oxide-copper nanohybrid: Anti-bacterial attributes for food safety and dye degradation study, New Journal of Chemistry, 43 (2019) 662-674, ISSN No: 1369-9261, Impact Factor: 2.7
  40. M. Maiti, M. Sarkar, S. Xu, S. Das, D. Adak and S. Maiti, Application of Silica Nanoparticles to Develop Faujasite Nanocomposite for Heavy Metal and Carcinogenic Dye Degradation, Environmental Progress & Sustainable Energy, 38 (2019) S15-S23, ISSN No: 1944-7450, Impact Factor: 2.1
  41. S. Thakur, S. Maiti, T. Paul, N. Besra, S. Sarkar and K. K. Chattopadhyay, Geometrically intricate sheet-on-pillar/flake hierarchy embracing cobaltosic and manganese oxides over flexible carbon scaffold for binder-free high-energy-density supercapacitor, CrystEngComm, 20 (2018), 6183. ISSN No: 1466-8033, Impact Factor: 2.6
  42. M. Sarkar, M. Maiti, S. Maiti, S. Xu, Q. Li, ZnO-SiO2 nanohybrid decorated sustainable geopolymer retaining anti-biodeterioration activity with improved durability, Materials Science and Engineering: C, 92 (2018), 663-672. ISSN No: 0928-4931. Impact Factor: 7.9
  43. M. Maiti, M. Sarkar, D. Liu, S. Xu, S. Maiti, B. K. Paul and S. Das, Tungsten doped hydroxyapatite processed at different temperature: dielectric behaviour and anti-microbial aspects, New Journal of Chemistry, 42 (2018), 16948, ISSN No: 1369-9261, Impact Factor: 2.7
  44. T. Paul, B. K. Chatterjee, S. Maiti, S. Sarkar, N. Besra, B. K. Das, K. J. Panigrahi, S. Thakur, U. K. Ghorai and K. K. Chattopadhyay, Tunable cathodoluminescence over the entire visible window from all-inorganic perovskite CsPbX3 1D architecture, J. Mater. Chem. C, 6 (2018) 3322, ISSN No: 2050-7534, Impact Factor: 5.7
  45. S. Pal, S. Maiti, U. N Maiti and K. K. Chattopadhyay, ZnO-(Cu/Ag)TCNQ heterostructure network over flexible platform for enhanced cold cathode application, Nanotechnology, 27 (2016) 265601, ISSN No: 1361-6528, Impact Factor: 2.9
  46. S. Maiti, S. Pal and K. K. Chattopadhyay, Recent advances in low temperature, solution processed morphology tailored ZnO nanoarchitectures for electron emission and photocatalysis applications, Highlight article, CrystEngComm, 17 (2015), 9264, ISSN No: 1466-8033, Impact Factor: 2.6
  47. S. Pal, S. Maiti, U. N Maiti and K. K Chattopadhyay, Low temperature solution processed ZnO/CuO heterojunction photocatalyst for visible light induced photo-degradation of organic pollutants, CrystEngComm, 17 (2015), 1464, ISSN No: 1466-8033, Impact Factor: 2.6
  48. S. Pal, S. Maiti, U. N Maiti and K. K Chattopadhyay, Spontaneous hyper-branching in ZnO nanostructures: morphology dependent electron emission and light detection, RSC Adv., 5 (2015) 81176, ISSN No: 2046-2069, Impact factor: 3.9
  49. S. Pal, S. Maiti, S. Dutta and K. K. Chattopadhyay, Ambient conditioned, solution processed CuO nanoflakes over carbon fabric for supercapacitor application: Performance enhancement via nanoparticle attachment, Journal of Atomic, Molecular, Condensate & Nano Physics, 6 (2015) 153–159, ISSN No: 2349-6088.
  50. S. Pal, S. Maiti, U. N Maiti and K. K Chattopadhyay, Scalable approach for the realization of garland shaped 3D assembly of CuTCNQ nanorods: an efficient electron emitter, J. Mater. Chem. C, 2 (2014) 4005, ISSN No: 2050-7534, Impact Factor: 5.7
  51. S. Maiti, U. N. Maiti, A. Chowdhury and K. K. Chattopadhyay, Ambient condition oxidation of zinc foil in supersaturated solution for shape tailored ZnO nanostructures: Low-cost candidates for efficient electron emitter and UV-detector, CrystEngComm, 16 (2014) 1659, ISSN No: 1466-8033, Impact Factor: 2.6
  52.  S. Santra, N. S Das, S. Maiti, K. K Chattopadhyay, Wide band gap p-type CuBO2 nanostructures by hydrothermal route and fabrication high quality p-CuBO2/n-ZnO nano-heterojunction, Chemical Physics Letter, 604 (2014) 97, ISSN No: 0009-261, Impact Factor: 2.8
  53. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Hierarchical TiO2 nanowire over fabric platform: potential candidate for wearable field emitter and photocatalyst, Synthesis and Reactivity in Inorganic, Metal-organic and Nano-metal chemistry, 44 (2014) 1255, ISSN No: 2470-1564.
  54. S. Maiti, U. N. Maiti, B. C. Behera, S. Pal and K. K. Chattopadhyay, Controlling the sharpness of ZnO tetrapods by restricted zinc oxidation in the open air: a low turn-on field emitter stabilized by graphene, J. Mater. Chem. C, 1 (2013) 4940, ISSN No: 2050-7534, Impact Factor: 5.7
  55. S. Maiti, U. N. Maiti, S. Pal and K. K. Chattopadhyay, Organic nanowires hierarchy over fabric platform for flexible cold cathode, Nanotechnology, 24 (2013) 465601, ISSN No: 1361-6528, Impact Factor: 2.9
  56. S. Das, S. Maiti, S. Saha, N. S. Das, K. K. Chattopadhyay, Template free synthesis of mesoporous CuO nano architects for field emission applications, Journal of Nanoscience and Nanotechnology, 13 (2013) 2722, ISSN No: 1533-4899, Impact Factor: 1.35
  57. S. Goswami, U. N. Maiti, S. Maiti, M. K. Mitra, K. K. Chattopadhyay, Polyaniline / Vanadium oxide composites: An effective control in morphology by varying reactant concentrations, Materials Chemistry and Physics, 138 (2013) 319, ISSN No: 0254-0584, Impact Factor: 4.3
  58. A. Sen, U. N. Maiti, S. Maiti, K. K. Chattopadhyay, Single crystalline nanostructures of giant dielectric calcium copper titanate: a convenient route toward materialization of hard to realize multi-component perovskite nanostructures, J Mater Sci., 48 (2013) 3967, ISSN No: 1573-4803, Impact Factor: 3.5
  59. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Three dimensional ZnO nanostructures realized through a polymer mediated aqueous chemical route: candidate for transparent flexible electronics, CrystEngComm, 14 (2012) 8244, ISSN No: 1466-8033, Impact Factor: 2.6
  60. R. Thapa, S. Maiti, T. H. Rana, U. N. Maiti, and K. K. Chattopadhyay, Anatase TiO2 nanoparticles synthesis via simple hydrothermal route: Degradation of orange II, methyl orange and Rhodamine B, Journal of Molecular Catalysis A: Chemical, 363–364 (2012) 223, ISSN No: 1381-1169, Impact Factor: 5.06.
  61. U. N. Maiti, S. Maiti, and K. K. Chattopadhyay, An ambient condition, one pot route for large scale production of ultrafine (< 15 nm) ZnO nanowires from commercial zinc exhibiting excellent recyclable catalytic performance: Approach extendable to CuO nanostructures, CrystEngComm, 14, (2012) 640, ISSN No: 1466-8033, Impact Factor: 2.6
  62. U.N. Maiti, S. Maiti, N.S. Das and K. K. Chattopadhyay, Hierarchical graphene nanospikes over 3D platform: A route towards fully foldable graphene-based electron source, Nanoscale, 3 (2011) 4135, ISSN No: 2040-3372, Impact Factor: 5.8.
  63. U. N. Maiti, S. Maiti, S. Goswami, D. Sarkar and K. K. Chattopadhyay, Room temperature deposition of ultra-sharp ZnO nanospikes array over metallic, non-metallic, flexible carbon fabrics: An efficient field emitter, CrystEngComm, 13 (2011) 1976, ISSN No: 1466-8033, Impact Factor: 2.6
  64. U.N. Maiti, S. Maiti, T. P. Majumder and K. K. Chattopadhyay, Ultra-thin graphene edges at the nanowire tips: A cascade cold cathode with two stage field amplification, Nanotechnology, 22 (2011) 505703, ISSN No: 1361-6528, Impact Factor: 2.9
  65. S. Goswami, U. N. Maiti, S. Maiti, S. Nandy, M. K. Mitra, K. K. Chattopadhyay, Preparation of graphene-polyaniline composites by simple chemical procedure and its improved field emission properties, Carbon, 49 (2011) 2245, ISSN No: 0008-6223, Impact Factor: 10.5
  66. U.N. Maiti, S. Maiti, R. Thapa and K. K. Chattopadhyay, Flexible cold cathode with ultralow threshold field designed through wet chemical route, Nanotechnology, 21 (2010) 505701, ISSN No: 1361-6528, Impact Factor: 2.9

 

Corresponding Author

  1. A Panda, K Palodhi, R Chakraborty and S Maiti, Modified thin film perovskite solar cell for high conversion efficiency, Optik, 246 (2021), 167838, ISSN No: 0030-4026, Impact Factor: 2.84 (2022).
  2. A Panda, K Palodhi, R Chakraborty and S Maiti, Application of porocities in the transparent electrode layer of a perovskite solar cell for performance enhancement, Applied Optics, 61 (2022), 9843, ISSN No: 2155-3165, Impact Factor: 1.7

 

International conferences Proceedings

  1. S. Thakur, S. Maiti, A. Acharya, T. Paul, N. Besra, S. Sarkar and K. K. Chattopadhyay, 3D Hierarchical Architecture Based on 1D TiO2 Nanorod and 2D MnO2 Nanoflake for High Performance Supercapacitor Electrode, AIP Conf. Proc., 1942 (2018) 140071. ISSN No: 1551-7616.
  2. S. Thakur, S. Maiti, S. pal and K. K. Chattopadhyay, Morphology Tailored Cobalt Oxide Nanoarchitectures Over Flexible Platform for Hazardous Organic Dye Degradation Under Visible Light, Materials Today: Proceedings, 5 (2018) 9749, ISSN No: 2214-7853.
  3. T. Paul, B.K. Chatterjee, S. Maiti, N. Besra, S. Thakur, S. Sarkar, K. Chanda, A. Das, P.K. Sarkar, K. Sardar and K. K. Chattopadhyay, Luminescence Behaviour of Room Temperature Chemical processed All-Inorganic CsPbCl3 Perovskite Cubes, AIP Conf. Proc. 1953, (2018) 030085. ISSN No: 1551-7616.
  4. K. Chanda, S. Thakur, S. Maiti, A. Acharya, T. Paul, N. Besra, S. Sarkar, A. Das, K. Sardar and K. K. Chattopadhyay, Hierarchical Heterostructure of MoS2 Flake Anchored on TiO2 Sphere for Supercapacitor Application. AIP Conf. Proc., 1953, (2018) 030138. ISSN No: 1551-7616.
  5. T. Paul, B. K. Chatterjee, S. Maiti, N. Besra, S. Thakur, S. Sarkar, K. Chanda, A. Das, K. Sardar and K. K. Chattopadhyay, Efficient Blue Emission from Ambient Processed All-Inorganic CsPbBr2Cl Perovskite Cubes, AIP Conf. Proc., 1942 (2018) 120026. ISSN No: 1551-7616.
  6. S. Pal, S. Maiti, and K. K. Chattopadhyay, Novel kite-like ZnO nano-tetrapods for sustainable environmental applications, AIP Conf. Proc., 1832 (2017) 050039. ISSN No: 1551-7616.
  7. S. Pal, S. Maiti, and K. K. Chattopadhyay, Photo-degradation of rhodamine B by low temperature, chemically processed ZnO/CuO hybrid photocatalyst under visible light, ISBN: 978-93-85436-74-1, 1098 7654321.
  8. S. Pal, S. Maiti, and K. K. Chattopadhyay, Morphology Induced Photo-Degradation Study of Low Temperature, Chemically Derived ZnO/SnO2 Heterostructure, AIP Conf. Proc., 1728 (2016) 020403. ISSN No: 1551-7616.
  9. S. Maiti, U. N. Maiti; K. K. Chattopadhyay, Visible Blind Photodetector Based on Room Temperature Grown ZnO Nanospikes Array, Proc. SPIE 8549, 16th International Workshop on Physics of Semiconductor Devices, 854921 (October 15, 2012); doi:10.1117/12.926956.
  10. S. Das, S. Maiti, K. K. Chattopadhyay, Facile synthesis of mesoporous CuO hollow architecture: An excellent field emitter, AIP Conf. Proc., 463 (2012) 1447. ISSN No: 1551-7616.

 

National conferences Proceedings

  1. S. Maiti, S. Pal, and K. K. Chattopadhyay, Metal organic charge transfer complex over Cu wire: route towards a robust 360o axial cold cathode display, ISBN Number: 978-81-928110-9-3

 

Book Chapter

  1. S. Thakur, S. Maiti, S. pal and K. K. Chattopadhyay, Geometrically intricate oxide based heterostructure over flexible platform: Morphology induced catalytic performance enhancement under UV light, Springer-Lecture Notes in Electrical Engineering, 462 (2018) 21-27, ISBN 978-981-10-7900-9.
  2. S. Maiti, U. N. Maiti; K. K. Chattopadhyay, Hierarchical TiO2 nanowire over fabric platform: potential candidate for wearable field emitter and photocatalyst, “Applications of Nano Materials: Electronics, Energy and Environment” Edited by V. Rajendran, R. Yuvakumar, K. Thiyagarajah, K. E. Geckeler, Bloomsbury Publishing India Pvt. Ltd. (2012), ISBN: 978-93-82563-35-8.

 

 

 

Life member: Indian Physical Society (Membership number: LM/1123)

Life member: Electron Microscopic Society of India (EMSI) (Membership number: LM -1597)

Participated

  1. AICTE Recognized Refresher course (duration 2 weeks) on “Engineering Physics” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  2. AICTE Recognized Industrial Training Programme (duration 3 weeks) on “Materials Characterization Techniques and Energy Storage and Harvesting Devices” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  3. AICTE Recognized Refresher course (duration 2 weeks) on “Application of Nanoscience in Modern Day Research and Technology” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  4. AICTE Training and Learning (ATAL) Academy Online FDP (duration 1 week) on “Novel Materials” organized by Rajkiya Engineering College Banda.
  5. AICTE Recognized Faculty Development Programme (duration 1 week) on “Nanomaterials and Devices” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  6. AICTE Recognized Faculty Development Programme (duration 1 week) on “Quantum and Energy Materials: Potential & Applications” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  7. AICTE Recognized Faculty Development Programme (duration 1 week) on “Materials and devices for advanced applications” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  8. AICTE Recognized Faculty Development Programme (duration 1 week) on “Smart Materials and Nanotechnology” organized by Applied Science Department of National Institute of Technical Teachers Training & Research, Chandigarh.
  9. Short term training programme (duration 2 weeks) on “LABVIEW & MATLAB application in Engineering” organised by National Institute of Technical Teachers’ Training and Research, Kolkata.
  10. One-week Faculty Development Workshop on “Teaching and Learning of Fabrication of Thin films & Optoelectronic Devices through Hands-on-Experience” organised by the Department of Physics in association with the Teaching Learning Centre, National Institute of Technology, Warangal

 

Papers presented in International / National conferences

  1. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Rapid Growth of ZnO-rGO Superstructure: Defect Activated Fast (<10 min) Dye Oxidation Under Visible Light, 6th International Conference on Nanoscience and Nanotechnology (ICONN 2021) [Mode of presentation in the conference: Poster: presenting author S. Maiti]
  2. K. Chanda, R. Sarkar, S. Maiti, and K. K. Chattopadhyay, Facile Preparation of CuCo2O4@MnO2 at Low Temperature: Efficient Visible-light Photocatalyst, 6th International Conference on Nanoscience and Nanotechnology (ICONN 2021).
  3.  T. Paul, S. Maiti, U. Mukherjee, S. Mondal and K. K. Chattopadhyay, Mechanochemically Processed FAPbBr3 for Piezoelectric Energy Harvesting Devices, 6th International Conference on Nanoscience and Nanotechnology (ICONN 2021).
  4. K. Sardar, S. Thakur, S. Maiti, K. K. Chattopadhyay and G. Majumdar, Temporal and Thermal Evolution of MnWO4 Nanorods and their Electrochemical Properties, 6th International Conference on Nanoscience and Nanotechnology (ICONN 2021).
  5. K. Sardar, S. Thakur, S. Maiti, G. Majumdar and K. K. Chattopadhyay, Designing of high performance pseudocapacitive Sulfurised NiWO4 material for advanced supercapacitors, XXth International Workshop on the Physics of Semiconductor Devices (IWPSD 2019).
  6. S. Mondal, S Das, N. Besra, T. Paul, S. Maiti and K. K. Chattopadhyay, Hybrid piezoelectric nanogenerator based on PVDF and vertically aligned ZnO nanorods for energy harvesting application, 2nd International Conference on Nanoscience and Nanotechnology (ICNAN-19).
  7. K. Sardar, S. Thakur, N. Besra, S. Maiti, G. Majumdar and K. K. Chattopadhyay, Low temperature processed Co2GeO4@ZnO core shell for electron field emission, International Conference on ‘Condensed Matter Physics’ (IEMPHYS-19).
  8. A. Panda, S. Maiti, R. Chakraborty, K. Palodhi, Increment of light in periodic structures introducing metallic nanolayer for solar cell application, OSI – International Symposium on Optics (OSI-ISO 2018).
  9. A. Rovisco, S. Maiti, R. Branquinho and P. Barquinha, Zinc-tin oxide tailored nanostructures produced by solution-based methods: a vehicle towards sustainable and multifunctional oxide nanoelectronics, XVII Brazilian MRS meeting-2018.
  10. T. Paul, B.K. Chatterjee, S. Maiti, S. Thakur, N. Besra and K.K. Chattopadhyay, All inorganic lead halide perovskite (CsPbI3) for aqueous supercapacitor, 2nd International Conference on Nano Science & Engineering Applications – 2018.
  11. S. Mondal, S. Das, S. Maiti, T. Paul, N. Besra and K.K. Chattopadhyay, Self-poled piezoelectric nanogenerator based on PVDF and ZnO nanocomposite for energy harvesting, 2nd International Conference on Nano Science & Engineering Applications – 2018.
  12. A. Das, S. Thakur, T. Paul, N. Besra, K. Sardar, K. Chanda, N. S. Das, S. Maiti, K. K. Chattopadhyay, Facile Synthesis of 3D CuBO2 Nano cubes for Supercapacitor Application, 2nd International Conference on Nano Science & Engineering Applications – 2018.
  13. T. Paul, B. K. Chatterjee, S. Maiti, N. Besra, S. Thakur, S. Sarkar, K. Chanda, A. Das, K. Sardar and K. K. Chattopadhyay, Efficient Blue Emission from Ambient Processed All-Inorganic CsPbBr2Cl Perovskite Cubes, 62nd DAE Solid State Physics Symposium, 2017.
  14. S. Thakur, S. Maiti, A. Acharya, T. Paul, N. Besra, S. Sarkar and K. K. Chattopadhyay, 3D Hierarchical Architecture Based On 1D TiO2 Nanorod and 2D MnO2 Nanoflake For High Performance Supercapacitor Electrode, 62nd DAE Solid State Physics Symposium, 2017.
  15. T. Paul, B.K. Chatterjee, S. Maiti, N. Besra, S. Thakur, S. Sarkar, K. Chanda, A. Das, P.K. Sarkar, K. Sardar and K. K. Chattopadhyay, Luminescence Behaviour of Room Temperature Chemical processed All-Inorganic CsPbCl3 Perovskite Cubes, 2nd International Conference on Condensed Matter & Applied Physics (ICC 2017).
  16. S. Thakur, S. Maiti, S. pal and K. K. Chattopadhyay, Geometrically intricate oxide based heterostructure over flexible platform: Morphology induced catalytic performance enhancement under UV light, International Conference on Communication Devices and Networking (ICCDN) 2017.
  17. K. Chanda, S. Thakur, S. Maiti, A. Acharya, T. Paul, N. Besra, S. Sarkar, A. Das, K. Sardar and K. K. Chattopadhyay, Hierarchical Heterostructure of MoS2 Flake Anchored on TiO2 Sphere for Supercapacitor Application, 2nd International Conference on Condensed Matter & Applied Physics (ICC 2017).
  18. S. Thakur, S. Maiti, S. Pal, and K.K. Chattopadhyay, Room temperature grown ultra-sharp ZnO nanoform for cold cathode application: performance enhancement via metal nanoparticle decoration, National Conference on Nanotechnology: Materials and Applications (NCoN: M&A 2016).
  19. S. Thakur, S. Maiti, S. pal and Kalyan Kumar Chattopadhyay, Simplistic realization of ultra-sharp ZnO nanocones over planar and flexible platform at ambient: Photocatalytic activity comparison and performance enrichment via metal nanoparticle decoration, International Conference on Functional Materials (ICFM 2016).
  20. S. Thakur, S. Maiti, S. pal and K. K. Chattopadhyay, Morphology Tailored Cobalt Oxide Nanoarchitectures Over Flexible Platform for Hazardous Organic Dye Degradation Under Visible Light, International Conference on Functional Nano-Materials-2016.
  21. S. Pal, S. Dutta, S. Maiti and K.K. Chattopadhyay, WO3 nanowire over 3D platform of carbon fabric: Supercapacitor and wearable electron field emitter, ICNT–2015.
  22. S. Pal, S. Maiti, and K. K. Chattopadhyay Morphology Induced Photo-Degradation Study of Low Temperature, Chemically Derived ZnO/SnO2 Heterostructure, ICC -2015.
  23. S. Pal, S. Maiti and K.K. Chattopadhyay, Exploration of Novel Glider and Tetrapod Shaped ZnO Nanoforms as Gas Sensor and Photocatalyst for Environmental Applications, RAINSAT-2015.
  24. S. Pal, S. Maiti and K.K. Chattopadhyay, Open air scalable synthesis of ZnO tetrapod: Enhanced electron emission performance via graphene attachment, CMDAYS15.
  25. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Hierarchical TiO2 nanowire over fabric platform: potential candidate for wearable field emitter and photocatalyst, MAM-2012.
  26. S. Maiti, A. Sen, U. N. Maiti and K. K. Chattopadhyay, Realization of 1D zinc oxide via ambient conditioned, one pot, aqueous chemical route: Candidate for field emitter cold cathode and photodetector, National Conference on Sustainable Development through Innovative Research in Science and Technology, 2012.
  27. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Well-ordered ultra-long ZnO nanorods array: Excellent candidate for UV nanorod laser and low threshold field electron emitter, WEM 2011.
  28. S. Maiti, U. N. Maiti; K. K. Chattopadhyay, Visible Blind Photodetector Based on Room Temperature Grown ZnO Nanospikes Array, IWPSD-2011.
  29. S. Goswami, S. Maiti, K. K. Chattopadhyay, M. K. Mitra, Synthesis and characterization of flake-like Polyaniline/Vanadium oxide composite material and study of their field emission behaviour, IWPSD-2011.
  30. S. Maiti, U. N. Maiti; K. K. Chattopadhyay, Polymer mediated morphology tuning of zinc oxide from nanowire, micro-disc and nanosheet to hierarchical higher order structure: Impact on UV photo-detection, International workshop on Nanomaterials (IWON): Engineering Photon and Phonon Transport.
  31. S. Maiti, U. N. Maiti; K. K. Chattopadhyay, Polysodium-4-styrene sulfonate assisted nanostructural assortment of ZnO: candidate for photo-detection and electron field emission, India-Australia International workshop on nanotechnology in materials and energy application (IWANM 2011).
  32. A. Sen, S. Maiti, K. K. Chattopadhyay, Giant dielectric response in (Li, Ti)-doped NiO ceramics synthesized by molten salt method, IAWNM 2011.
  33. S. Maiti, U. N. Maiti and K. K. Chattopadhyay, Purely UV emitting ultra-long ZnO nanorod array grown over zinc foil: An aqueous pathway for UV nanowire laser, ICFANT 10.

 

Workshop Participated 

  1. Two-day Workshop on Material Characterization Techniques organized by Jadavpur University, 4th -5th October 2016.
  2. Workshop and hands-on experience on JEOL electron optics products organized by JEOLINDIA at IACS Kolkata and Calcutta University on 1st -2nd July 2013.
  3. Workshop on “Advanced Functional Materials (WAFM-2012) organized by Department of Physics, Banaras Hindu University, 19th -24th March 2012.
  4. Workshop on Electron Microscopy (WEM2011) jointly organized by Institute of Physics (IOP) and Indian Institute of Technology Bhubaneswar (IITBBSR), Bhubaneswar from 23rd – 25th November 2011. [Sponsored by Electron Microscope Society of India]
  5. National school cum workshop on Magnetic Phase Transition and Transformations organised by Jadavpur University & UGC DAE Consortium for Scientific Research, Kolkata chapter 3rd -9th August 2011.

Invited Lecture

  1. “Development of Novel Zinc Oxide and Graphene Based Nanostructures for Advanced Electron Field Emission Application’ at Anfiteatro Leopoldo Guimarães-CENIMAT, Lisboa, Portugal, 21st March, 2017.
Quick Links
Approval, Affiliation & Accredition
NIRF
NBA
Mandatory Disclosure
Archive
Notices
Events
Achievements
Gallery
Committee & Cells
Institute Cells / Committee
Anti-Ragging Committee
Internal Quality Assurance Cell
Internal Complaints Cell
Important Links
Institute Login
Greivance Redresal
Other Information
Affiliating University
General Inquiry
4, Diamond Harbour Road, Kidderpore, Kolkata- 700023 West Bengal, India
8648857332 / 8648891532 / 033 2448 1081 / 033 2448 1082
[email protected]
Admission Inquiry
Accounts & Scholarship Inquiry
Semester Marksheet & Pass Certificate Inquiry
8017993802
Bonafide & other certificates Inquiry(excluding pass certificate)
© 2025 St. Thomas' College of Engineering & Technology
Designed & Developed by INSPIRE STUDIO